How to prepare your mix for mastering: a practical checklist
23/05/2026
Sending a mix to a mastering engineer without preparing it properly is a bit like handing a photographer a blurry negative and asking for a sharp print. There is only so much that can be done with what arrives. The preparation stage is brief and straightforward — but skipping it means the mastering session starts from a worse place than it needs to.
This is a practical checklist. Go through it before you export.
1. Bypass or remove master bus limiting
This is the most important step, and the most commonly missed.
Many producers and home recording engineers put a limiter on the master bus while they mix — it keeps the mix from clipping and gives a rough impression of what the finished, loud version might sound like. That is a reasonable working practice while you are mixing.
But when you export for mastering, that limiter needs to come off.
Mastering involves applying dynamics processing — compression, limiting — to the final file. If your mix already has limiting baked in, the mastering engineer is processing a file that has already been compressed and limited. The results will be less natural, less dynamic, and the engineer has less to work with. The limiting that happens at the mastering stage is part of achieving the final loudness and polish. It works best on an unprocessed mix.
If you use other heavy processing on the master bus — multiband compression, heavy saturation, heavy stereo widening — consider bypassing those too, or at least discussing with the mastering engineer before you export.
2. Leave headroom
With the master bus limiting bypassed, your mix will likely peak somewhere below 0 dBFS. That is the goal.
A mix with peaks around -3 to -6 dBFS is ideal for mastering. This leaves the mastering engineer room to apply processing without immediately hitting the digital ceiling. If your mix is peaking at -1 dBFS with the limiter off, turn the master fader down a couple of dBs before you export.
If your mix is peaking at 0 dBFS or above — if the waveform is flat-topped — that means clipping has already occurred in the mix chain. This is a problem that cannot be fixed at mastering. It needs to be addressed in the mix before export.
3. Check for clipping in individual tracks
While you are checking the master bus, look at the channel strips for individual tracks as well. A mix can peak at a safe level on the master bus while individual channels — particularly drums — have been clipping internally. This introduces distortion that is already baked into the mixed file.
Most DAWs show a clip indicator on each channel. If any channels are showing red, that is worth addressing before you export.
4. Export at the right format
Export as WAV or AIFF. These are lossless formats that preserve the full quality of your mix. Do not export as MP3 for mastering — lossy formats introduce compression artefacts that become more audible when processing is applied.
For bit depth, export at 24-bit. This is the standard for mastering projects and gives more resolution than 16-bit.
For sample rate, export at whatever sample rate your session is running — 44.1kHz or 48kHz are both standard. Do not do any sample rate conversion before you send it. The mastering engineer will handle that as part of the final export.
5. Label the file clearly
This sounds trivial but matters in practice. A file called “final_mix_v7_FINAL_USE THIS ONE.wav” is harder to work with than “ArtistName_TrackTitle_mix_v1.wav.”
If you are sending multiple tracks for an EP or album, number them in the intended running order. If there are multiple versions — for example, a radio edit and a full version — label them clearly.
6. Include reference information
A short message alongside the files makes the session go faster and the result better. Useful information includes:
- What the release is for (streaming only, streaming and CD, vinyl, a specific platform)
- Any loudness targets you are aware of or have a preference for
- Reference tracks — songs that represent the kind of sound or loudness you are aiming for
- Any specific concerns about the mix that you want the mastering engineer to be aware of
A mastering engineer can make reasonable decisions without this information, but having it means those decisions are better informed and more likely to match what you are expecting.
7. Listen back before you send
This is obvious but easy to skip when you have been staring at the same mix for hours. Before you export and send, listen to the whole track from start to finish on different systems — headphones, monitors, a phone speaker, a car stereo if you have access.
Are there any obvious issues? Anything that jumps out as wrong that was not there before? An unexpected noise at the start or end of the file? A section where the levels are unexpectedly different from the rest?
Catching those things before the file is sent saves a round of communication and a second export.
The short version
Remove master bus limiting. Leave headroom — peaks around -3 to -6 dBFS. Export as 24-bit WAV. Label files clearly. Include a note with the relevant information.
That is most of it. A well-prepared mix arrives at mastering ready to be worked on, not corrected. The results are consistently better, and the process is faster.
If you are not sure whether your mix is ready to send, get in touch — it is always worth a quick listen before the mastering session starts.